High-speed D&I bodymakers producing aluminum beverage cans risk severe wall tearing and die scoring from adhesive galling. Mitigating tool failure demands submicron Sinter-HIP tungsten carbide, pre-stressed steel casing per ISO 286-2, and longitudinal mirror lapping.
A high-speed D&I bodymaker producing aluminum beverage cans at 350 strokes per minute suffered tool jamming and wall splitting after 320,000 cycles. Inspection of the third-stage carbide ironing die revealed aluminum buildup along sizing lands and axial scoring. Metal pickup ruptured lubricant films, causing severe galling. Punch forces spiked by 45%, tearing can domes. Upgrading to submicron Sinter-HIP carbide dies with mirror-lapped sizing lands and pre-stressed casing restored die life past 12 million cans.
Aluminum galling stems from adhesive wear under contact pressures exceeding 400 MPa. W. Daodon et al. demonstrated in "Vanadium nitride and titanium nitride coatings for anti-galling behavior in ironing of aluminum alloy cups" (Wear, Vol. 342–343, 2015, pp. 279–287) that extreme sliding friction depletes boundary lubricant films during aluminum cup ironing. Direct metal contact induces solid-state micro-welding between ductile aluminum and exposed cobalt binder pools.
Transferred aluminum work-hardens on the die bore, forming abrasive lumps that scratch can walls. Suppressing galling requires minimizing cobalt binder exposure using submicron grain sizing (0.5–0.8 µm). Vacuum Sinter-HIP densification eliminates microporosity per ASTM B276 rating A02 B00 C00, achieving transverse rupture strength over 2600 MPa per ASTM B406 and density verified per ASTM B311.
Bodymaker tooling requires tailored carbide grades across successive reduction stages:
| Tooling Station | Operating Function | Reference Metallurgy | Binder Content | Grain Size | Density (ASTM B311) | Hardness | Rupture (ASTM B406) |
|---|---|---|---|---|---|---|---|
| Redraw Die | Initial Cup Redraw | Ref. ISO K20 / WC-9Co | 9.0% Co | 0.8–1.2 µm | 14.65 g/cm³ | 90.8 HRA | 2900 MPa |
| 1st Ironing Die | Heavy Wall Reduction | Ref. ISO K20 / WC-8Co | 8.0% Co | 0.6–1.0 µm | 14.75 g/cm³ | 91.5 HRA | 2800 MPa |
| 2nd Ironing Die | Mid-Stage Thinning | Ref. ISO K10 / WC-6Co | 6.0% Co | 0.5–0.8 µm | 14.95 g/cm³ | 92.5 HRA | 2650 MPa |
| 3rd Ironing Die | Final Sizing Land | Ref. Submicron WC-6Co | 6.0% Co | 0.4–0.7 µm | 15.00 g/cm³ | 93.0 HRA | 2600 MPa |
Ironing dies require rigid tolerances and pre-stress casing:
1. The Entrance Angle Transition Trap: Overseas prints often specify reduction angles and blend radii without mandating continuous axial profile polishing. Conventional radial grinding leaves microscopic circumferential grinding marks that snag incoming aluminum cups, accelerating ringing wear. Sourcing prints must explicitly mandate CNC optical profile grinding followed by longitudinal diamond lapping to Ra 0.05 µm along the entire entrance profile.
2. The Post-Shrink Distortion Trap: International buyers frequently inspect loose carbide die nibs prior to casing assembly. Thermal shrink-fitting into alloy steel retainers exerts intense compressive hoop stresses that alter bore roundness by several microns. Procurement prints must mandate that final diamond sizing and mirror lapping are performed only after shrink casing assembly is fully completed.
As an engineering sourcing partner for canmaking tooling, Carbidea connects container manufacturers with partner mills for die and mold blanks and carbide-steel assemblies. Explore guides on carbide grade selection and can you braze carbide to steel. Submit drawings for quotation within 1–2 business days.
Aluminum galling occurs when high contact pressures (>400 MPa) deplete lubricant films. Solid-state micro-welding transfers aluminum onto exposed cobalt pools, work-hardening into abrasive lumps that scratch can bodies.
Submicron grain structures (0.4–0.7 µm) narrow the mean free path between cobalt binder pools, minimizing exposed binder surface area. High hardness (92.5 to 93.0 HRA) paired with mirror lapping (Ra 0.05 µm) eliminates mechanical anchoring sites for aluminum pickup.
Carbide possesses high compressive capacity but limited tensile strength. Shrink-fitting nibs into alloy steel retainers per ISO 286-2 fit H7/s6 provides compressive pre-stress, counteracting internal burst pressures and preventing fatigue fractures.
Related Technical Guides:
Carbide Grade Selection Guide · Brazing Carbide to Steel · Choke Trim Engineering Guide
Related product category: Dies & Molds →
Send a drawing or photo, get a quote in 1–2 business days.
Custom small-batch manufacturing to your print — prototype to production.
Request a Quote